Parker hydraulic filter carts are the ideal way to prefilter and transfer fluids into reservoirs or to clean up existing systems. Parker filter carts can be used for filtering new fluid before putting it into the system, or conditioning fluid already in use.  The 5MFP and 10MFP filter carts are now available with Parker double length Moduflow Plus filter housings, for even more filtration.

•  Two filter design provides long element life and pump protection
•  Wide variety of particulate elements to achieve desired cleanliness level
•  Par-Gel water removal elements available
•  Lightweight and portable
•  Two flow rates available (5 gpm and 10 gpm)

Automatic Filtering available with Icount Particle Detector

• A remarkable cost-effective market solution to fluid management and contamination control
• Innovative solutions prolonging fluid life and reducing machine downtime
• A predictive analysis maintenance program enabling planned monitoring
• Simple communication protocols used for user set-up, operation and output information

Specifications
Minimum sample time:  3 seconds
Maximum sample time:  300 seconds
Repeat test time:  3 seconds
Principle of operation:  Optical detection of actual particles
International codes:  ISO 7-21, NAS 0-12, (AS-4059 00-12 available upon request)
Power requirement:  Regulated 9 to 40 Vdc
Internal Flow Range:  40 - 140 ml/min (optimum flow 60 ml/min)
Case construction:  User friendly bead-filled nylon material
Working pressure:  2 to 420 bar (6000 psi)
Communication options:  RS232, 4-20mA, 0-5Vdc, CANBUS and RS485

#2716 Copyright 2009 Western Integrated Technologies. All rights reserved. This knowledge base document may not be published or redistributed without the written consent of Western Integrated Technologies