KB Search

Results 11 - 17 of 17 for operating

Sort By:

Search In: Articles, Troubleshooting, WIT Products

Troubleshooting Hints For All Types Of Pumps - Part 2

Excessive Pump Wear Oil not properly filtered, causing it to get contaminated with dirt and other abrasive materials. These circulate through pump and oth…
Troubleshooting - Created on: 10/20/2008 11:18:10 AM

Troubleshooting Hints For Hydraulic Systems - Part 2

Leakage In The System Check the whole system for escaping fluid. Serious leaks in the open are easy to find, however leaks often occur in concealed piping.&nb…
Troubleshooting - Created on: 10/20/2008 10:40:37 AM

Effect On Low Voltage On Power Unit Operation

Summary Because of low voltage at the motor, a motor adequately size to drive a pump at a given pressure when operating at speed may not be able to start the pump a…
Articles - Created on: 9/26/2008 11:55:29 AM

Electrical Power Distribution And Its Effect On Motor Operation

Summary Voltage drop in long electric supply circuits can have an adverse effect on motor performance. Consider true voltage available at motor under load …
Articles - Created on: 9/26/2008 10:39:57 AM

Single-Phase Electric Motor Performance Characteristics

Summary Pull-up torque during starting is critical when specifying electric motors Note: For the following discussion, assume the voltage and signal frequency a…
Articles - Created on: 9/16/2008 11:29:44 AM

Automatic Accumulator Pressure Release Valves - AJK 400

AJK 400 For use in accumulator systems employing a fixed displacement pump with a differential unloading valve, only three connections required to the system, an…
WIT Products - Created on: 9/10/2008 9:20:55 AM

Automatic Accumulator Pressure Release Valves - ASN 400 And 800

ASN 400 800 For use in accumulator systems employing a pressure compensated pump, only three connections required to the system, and it is safe – only one movin…
WIT Products - Created on: 9/10/2008 9:07:11 AM

« Previous12