There is an upcoming change to the forged body used in Parker’s brass compression fittings, specifically for part numbers 168C-4-2 and 168CA-4-2. The change will take effect on November 1, 2025. Please contact us for drawings and print comparisons. The change will become effective on November 1, 2025. After this date, units of 168C-4-2 and […]
In February, Parker announced the change to part numbers for the Gold Cup mechanical shaft seals. As part of that change, the old seal 623-00016-0 was replaced with a new seal 623-00018-0. However, during implementation, Parker discovered an important compatibility issue: the spring retainer supplied with the new seal did not properly fit Gold Cup […]
Parker’s Quick Coupling Division (QCD) has announced that the Spectrum series of thermoplastic quick couplings is being obsoleted effective immediately. While existing purchase orders will be honored and fulfilled, new orders for Spectrum products will not be accepted. This notice is consistent with the broader global resourcing strategy and supply chain optimization initiatives at Parker. […]
Parker Hydraulic Valve Systems Division has announced an expansion of its D*FP GEN IV Valve 5-Day Lead-Time Program. Effective September 26, 2025, this quick-ship program of direct-operated proportional directional valves will include the D1FB/D3FB, D1FC/D3FC, and D1FP/D3FP valve families. The program supports shipments of up to three valves per order, making it an excellent option […]
Affected Part Numbers FEM-1001-16FP-NL — Female Coupler, 1″ Body, NPTF Port A female coupler in the FEM/IF family with a 1″ body size and 1-11.5 NPTF female port (“FP”). It retains ISO 16028 design and the FEM flat-face architecture users expect. The obsoleted part has a no-lok feature, and the replacement (FEM-1001-16FP) features a sleeve-lock. […]
On September 30, 2025, Parker’s Quick Coupling Division will discontinue the current Pressure Controller model SCPSD. The replacement is an updated model SCPSDI.
The Parker Fluid System Connectors Division unveiled the new Transair Vented Ball Valve with lockable handle & integrated venting port.
Parker Valves Previously Ordered as D1VW…YERP Must Now Be Ordered as D1VW…YERPZ Effective immediately, any hydraulic valve formerly specified as part number D1VW…YERP must now be ordered using the revised part number D1VW…YERPZ. This is a naming update only—there is no change to the valve’s form, fit, or function. Operational performance and physical compatibility remain […]
Parker’s FCG, FSC, and PTC Divisions Announced that over 650 Parts Will No Longer Be Available in Box Quantities. Parker’s Fluid Connector Group’s FSC and PTC divisions announced that hundreds of fittings will no longer available for box-quantity orders. The fittings are still available, but box-quantity specific part numbers can no longer be used to […]
The Parker 901GH‑12 rubber hose washer will be obsolete and replaced by the new 30GH‑12 seal. Garden Hose Washer Change Overview Benefits of the Softer 30GH-12 Garden Hose Washer Implementation Plan & Timeline What You Should Know Final Notes Parker and Western Integrated Technologies are committed to continuous quality improvements. The transition from 901GH‑12 to […]









